Horizons Apex Technical Tool

Oilfield Chemical Problem Solver

Describe the operating symptom, enter the essential field conditions and receive a structured first-pass diagnostic plan. The output is designed to improve technical discussions—not to replace representative sampling, laboratory testing or a controlled field trial.

Application-ledField-ready checklistNo data is uploaded

1. Challenge

2. Conditions

3. Diagnostic plan

Select the main operating challenge

Choose the primary symptom. The diagnostic plan will also consider the additional symptoms you select.

Crude-oil separationSlow water drop, rag layer, high BS&W or dirty water
Corrosion controlCO₂/H₂S corrosion, MEG service or inhibitor underperformance
Scale depositionInorganic scale, restriction, produced-water change or inhibitor review
Foam controlSeparator foaming, carryover or antifoam instability
Low-temperature flowHigh pour point, wax deposition or cold-flow deterioration
Microbial controlMIC risk, biofilm, souring or biocide programme review

Enter the available operating conditions

Approximate values are acceptable for initial screening. Leave unknown values blank.

Operating temperature (°C)

Water cut (%)

Current chemical dosage (ppm)

Recent operational change

Operational impact

Representative sample available?

Short technical note (kept only in this browser)

Structured first-pass review

Diagnostic plan

Priority: Review

Confirm measurements and field conditions before changing product or dosage.

Likely diagnostic branches

First checks

Minimum data package

Recommended laboratory validation

Related Horizons Apex resources

Case note

Recommended next action:

Send this case to Horizons Apex

How to use the result

The generated plan is a disciplined starting point. Do not change several operating variables simultaneously. Confirm the analytical method, verify actual chemical delivery, establish a valid baseline and then evaluate one controlled change at a time.

Technical limitation: This tool does not recommend a commercial formulation, guarantee performance or replace site safety procedures. Final recommendations require representative data, compatibility review and application-specific testing.